Surge Protection

Don’t Overload Your Power Points

With more electrical devices in the average home than ever, it’s not hard to overload a breaker. It could be that you’ve got too many appliances hooked into one outlet or a wiring issue. At the end of the day, it’s about circuits, your electrical panel, power points.

We’re not talking about the software. A power point refers to an outlet, which can overload if you have too many electrical demands on it. Once an overload happens, anything plugged into that outlet will turn off. Unfortunately, it could blow a fuse that needs replacing or damage equipment.

The good news is that a lot of modern electrical appliances have steps in place to avoid an electrical fire. Your electrical panel probably shuts off automatically if it senses an overload. There are many things you can do to reduce electrical demand or blow a fuse.

Don’t Put Your Eggs in One Basket

When you’ve got a power point that’s being overloaded, there are several signs to watch for. Some of the most common issues are:

  1. Lights cutting in and out or flickering
  2. A burning smell or singed outlet
  3. Slow charging for devices
  4. Buzzing or a low hum sound from your outlet

All of these can indicate that your power point has too many things plugged in, or too many that use a lot of electricity. When that happens, you should make use of multiple outlets. A rule of thumb is to connect a single large appliance per outlet.

That means your microwave shouldn’t be plugged into the same point as your toaster. If you’re short on outlets, you have the option to use a power strip. While our team at Turner On Services can always install and wire new outlets, you might get by with a power strip.

The biggest danger there is that it makes it easier to overload a circuit with more plugs. Multiple small devices might work, though. When not in use, you can always turn off the power strip and prevent passive electricity loss.

If you use a power strip, we recommend a surge protector. It’s also good to check the amps your strip or protector is capable of. Our experts can help if you have any questions or need more outlets for your electrical appliances, so give us a call today!

Due for an Upgrade?

If you’re careful with your power points and still dealing with an overloaded system, it could be that your electrical panel is outdated. There are many reasons you might need a better panel. You could have a fuse box, especially if your home is 20 or more years old.

These weren’t intended for the amp requirements of modern households. An older electrical panel can also have fewer circuits or have a lower amp capacity. Whatever the case, an overloaded panel could lead to an electrical fire or damaged devices.

Local Electrical Panel Replacement

The danger of the former is obvious, but damaged appliances can be expensive to replace or fix. Turner On Services has a team of experts that can do all of those things or upgrade your electrical panel to avoid issues completely.

Power points could also overload if the wiring is worn down, done wrong, or made with knob or tube. We can rewire your home and help you relax in comfort knowing you’re safer. If you need any of our electrical services, give us a call today for an inspection!

Don’t hesitate to ask about our lighting servicesgenerator installation services, and smart home technology!



It Could Be Time for an Outlet Replacement

Most modern households use a lot of electricity, which means wear on your outlets. Whether it’s improper wiring, an outdated electrical panel, or more appliances, you could overload your circuit. Unfortunately, they can wear out over time, too.

If left alone, your home or business could be in danger of an electrical fire or damaged devices. The good news is that there are several signs to watch for to know it’s time for a new outlet. One obvious sign is if the outlet stops working completely.

It could just be a tripped breaker, and you should check if the other outlets work. That’s just the start of things to watch for, though. Turner On Services can help with outlet replacement when the time comes, so give us a call if you spot anything!

Trust Your Senses

The five senses can tell us a lot about things in our everyday lives. What you might not know is that your sight, smell, touch, and hearing can help avoid electrical disaster. Look at your outlets from time to time and pay attention to singed marks around the cover.

Darkened plates could mean that the outlet wiring is sparking or the circuit is shorting out. Avoid using that outlet until it’s been replaced. Likewise if you notice physical damage to the outlet cover. This could let dust or other particles inside to collect.

Once that plug is used, the gathered dust could cause an arc flash of 1,000 degrees. You should also feel your outlet when you’re using it to make sure it’s not hot or warm. If it is, that could mean an issue with the wiring.

Any improper or worn out wiring can cause an electrical fire, so replacing the outlet might not be enough. Among our many services, Turner On Services can replace or rewire your home. You should also call us if you smell anything burning or notice a spark when you plug something in. Here are some of the other common issues that could need outlet replacement by our professionals:

  1. If your outlet is loose and plugs keep falling out, it could be that it’s worn out. This can lead to sparks or an electrical fire.
  2. Grounded outlets have 3 holes as opposed to 2. If your outlet isn’t grounded, it could be more susceptible to overloading from a lightning storm or appliances that use a lot of amps. We strongly recommend letting us install grounded outlets.
  3. You should update any outlets that were there with a home you’ve bought recently. Outdated outlets could be dangerous.
  4. A charger that cuts in and out or any kind of breaking circuit could mean there’s a problem. It could be that the outlet’s worn down or damaged, or there could be a short circuit. 

If you notice any of these signs or have any concerns about your outlets, we can replace or repair them. Just call us today and get started with an estimate!

Upgrade Your Outlets

Surge Protection

A lot of homes have older outlets or haven’t heard of a ground fault circuit interrupter. These GFCI outlets are more resistant to electrical shock and moisture. We recommend letting us install these in rooms like the bathroom and kitchen.

They can prevent an electrical fire or short circuit from occurring. Most GFCI outlets can last around a decade, so even if you have them you might need to replace them after a while. It never hurts to have your outlets inspected by a professional, either. GFCI outlets have extra safety features in place to prevent a power surge. If they detect any signs of an overloaded circuit, they turn off automatically. Whether you need to replace your outlets or let us upgrade them, give us a call now and schedule your inspection!

Don’t hesitate to ask about our lighting servicesgenerator installation services, and smart home technology!


Electrician Near Me

Understanding Your Home’s Wiring

A lot of homeowners don’t know much about the power coming into their homes. While it’s good to know about electricity, the wiring can be even more important. That’s because there are a lot of issues that can come from improper or outdated wiring.

If you’ve got an older house, the electrical wiring and panel could be inefficient for modern voltage demands. In fact, the entire electrical system in your home might not be enough to handle the amps required to power your appliances and devices.

Older homes are also prone to having ungrounded fixtures and outlets. Our team at Turner On Services knows the updated safety codes to make sure your home is secure. While you might not be required to rewire your home, it’s a good idea to keep you safe.

Whether it’s a wiring issue or a lack of grounding, you should always hire a professional for the best results. To get started, give us a call today and schedule an inspection you can trust!

Grounding and Polarization

If you weren’t aware, a grounded plug has 3 prongs instead of 2 in the plug. That third hole gives electricity another current to flow through, which can spread out the amps and send it into the earth. This can prevent an electrical shock if there’s an issue with your outlet.

The way a grounded circuit works is with a grounding rod. This part goes no less than 8 feet in the earth near your home or through a cold water pipe. It can also involve metal sheathing or wiring that connects separately from the rest to a neutral section on your electrical panel.

While it’s possible to ground each outlet by itself, it’s more cost-efficient and effective to have them grounded together. This brings us to polarization, because our experts know all about electricity and the best ways to handle it.

Outlets with only 2 holes aren’t grounded or polarized. Even if you don’t have grounded plugs in your home, it’s crucial to at least have them polarized. This can keep you safer from damaged appliances or power surges.

The bad news is that older wiring, like tube or knob material, might not be grounded, which means we can’t install a grounded outlet. That might cause electrical issues or put your property in danger.

However, we’re the experts for a reason. We can ground your circuits and install ground fault circuit interrupter outlets. These upgraded outlets are polarized and grounded, which provide the safest results. If you want the best, give us a call today and get started!

Feel Safer with Electrical Grounding

If you live in an older house, your electricity might go through neutral wiring instead of being grounded. Even if it is grounded, it might be connected to a metal pipe. If it’s the former, it could be less efficient or dangerous. The latter might be pointless for grounding, though.

Surge Protection

A lot of “updated grounding” that comes out of your home or business might have a plastic water pipe connected to your building. That makes it useless and puts your electrical system at risk.

Aluminum grounding can also become corroded over time, which can allow the wires to get damp. If that happens, or you don’t have the required materials and electrodes, your grounding might not work properly.

Turner On Services offers a number of electrical services. Our team of experts has a lot of experience with residential and commercial buildings, so you can trust us. Call us today to schedule an inspection, or feel free to ask any questions you have!

Don’t hesitate to ask about our lighting servicesgenerator installation services, and smart home technology!


New Home Owners

Top Electrician in Batavia, OH

There are a lot of homes in Batavia, OH and the surrounding area. If you’ve just moved into a new home or become a homeowner for the first time, you might want to know the best ways to keep your electrical systems safe.

One thing you can do is identify the Ground Fault Circuit Interrupters. These GFCI’s are special outlets designed to prevent electrocution. They’re usually installed in bathrooms, kitchens, and garages. You might have one on your home’s exterior, too.

Thanks to the National Electrical Code, any new home has to have GFCI’s installed. While that means you’re safer with a new house, you’ll need to double-check an older home. These might not have them, so you’ll need a professional electrician to install them.

That’s where we come in. Turner On Services is prepared to help with your GFCI’s or any electrical need you may have. All you have to do is call us today and we’ll get started with an inspection and estimate!

Fast Electrician in Batavia, OH

A key to electrical safety is knowing how to turn everything off. It may seem simple, but breakers aren’t as simple as flicking a light switch. After all, there are electrical circuits all over your home. One wrong move with electricity and you could make the problem worse.

Whether you’ve got a fuse box or an electrical panel, you have breakers. Each breaker is associated with a circuit that powers an outlet. By turning off a given breaker, you’re effectively turning off power to that circuit.

If you’re lucky, each circuit is labeled. If you’re even luckier, the labels are correct. Some previous owners or electricians will change wiring and forget to change labels, so it’s always good to know which breaker goes to what when you move in.

With circuits, it’s also crucial to understand wattage. Every circuit can only handle so much power before it gets overloaded. Major appliances should be limited to one per outlet. Too many high-voltage appliances can cause an electrical fire or damage to your devices.

If you want to know more or need more outlets installed, you can trust our electrician in Batavia, OH or surrounding areas. We can handle your circuits or recommend the best products. For example, you can save with LED bulbs, so don’t hesitate to call us today!

Trust Your Electrician in Batavia, OH

We know how tempting it can be to fix things yourself. However, when it comes to electricity, it can be dangerous or even fatal.

Skilled Electrician in Anderson OH

Touching an exposed wire by accident or handling the wrong thing can give you an electric shock or start a fire. The same goes for waiting too long between inspections.

We recommend an annual inspection to be safe. Our team will check for issues for maintenance or replacement. In many cases, we can fix a minor problem before it grows into a much more expensive one. If it’s been a while since your last inspection or you just want to be aware, there are signs to watch for.

If you spot any of these things, you should call us as soon as possible: Flickering lights A burning or smoky smell from your outlet Your outlets are glowing or bright You get zapped by the light switch Lights cut off randomly You hear a buzzing or humming sound from the switch.

Those are just a few of the common reasons for an electrician. If you notice anything like that, or just want peace of mind, feel free to call. Of course, we can also take care of rewiring, installations, and electrical panel replacements. Considering the fact that you could save with an upgraded panel, it’s worth finding out.

Let our experts show you all the ways you could benefit with your electricity when you call us today!

Don’t hesitate to ask about our lighting servicesgenerator installation services, and smart home technology!


Surge Protection in Batavia OH

Get an Electrician for Surge Protection

When you think of a power surge, most homeowners think of a bad storm. While lightning can cause a blackout in your home, there are a lot of potential causes for a surge. That’s why surge protectors are so important to keep your appliances safe.

To make things even more complicated, many people don’t know that there are different types of surge protectors. You’re probably familiar with the typical ones, but whole home surge protectors are what our experts recommend for maximum results.

Electricity fluctuates often, so you might not realize how many surges happen. The truth is that your home probably has dozens of them over the course of a year. They’re not as noticeable as one that causes a power outage, but they can cause expensive damages.

That’s because the small surges add up on your appliances. This can lead to repairs or replacements being needed. You’ve got 2 main options to keep your home safe and possibly save money:

  1. Power strip surge protector. While our electrician advises against a normal power strip, because it could overload your circuit, if you have to use a power strip you might as well protect your electronics.
  2. Whole home surge protector. When you want to make sure your house is secure, this is installed by a professional onto your electric panel. It’s a little more expensive than other options, but the savings over time could far outweigh that cost.

If you want the peace of mind of knowing your electronics are safer, we can help. We offer surge protection service in Batavia, OH and surrounding areas because we care. When you’re ready for us to put our experience to work for you, give Turner On Services a call today!

Feel Secure with an Electrician Near Me

Chances are you’ve never had a whole home surge protector, but these offer the most protection. That’s not to say that a power strip surge protector isn’t effective, it just wouldn’t keep everything in your home safer.

Our team can recommend which one is best for your electrical needs. It mostly comes down to how many devices and appliances you have but, in most cases, a whole home version is your best bet. Here’s why:

  1. Peace of mind. You won’t have to worry about things that aren’t on your power strip during a storm or if a transformer blows. That’s not to mention the numerous mini-surges throughout the year.
  2. They might cost a little more, but everything in your home is protected. That means fewer repairs and replacements, which could add up to a lot of savings.
  3. Higher quality of protection for your appliances.

If you’re still on the fence about which surge protection service in Batavia, OH is right for you, feel free to give us a call today! Talk to our electrician with any questions you have, or get started with an estimate.

We’ll Protect Your Home from Power Surges

When it comes to any home improvement, we understand that you want to know what you’re getting. After the inspection and estimate, our electrician will install a box near your electrical panel. It may not seem like much, but that box works overtime to keep your home safe.

The way it works is that, anytime it senses a shift in voltage, it diverts electricity. By grounding excess voltage, whether from lightning to a small surge, it saves your appliances. You’ll need a professional for the installation, but these boxes can pay for themselves many times.

Even better news is that our team has been doing this for a long time. We know the best manufacturers that make quality products. We can help you find the best whole home surge protector for your needs.

If you consider how many appliances and devices you have in your home, there’s a lot that can get damaged or broken. The best option is to prevent needing to replace expensive appliances in the first place.

Photo of Professional Surge Protection in Batavia, OH

There’s also the wiring to worry about. One wrong surge and any improper or outdated wiring could spark. Electrical fires can have many causes, including malfunctioning appliances and an electrical panel replacement being ignored.

We can help with all of those problems and more, but so can a whole house surge protector. This device can keep you safe between our annual inspection, so don’t wait. Call us today and know that your electronics are in the best hands!

Benefits of Whole Home Surge Protection Service in Batavia, OH

We mentioned them briefly earlier, but there are a lot of ways that a whole home surge protector can help. When you let an electrician near me install your box, you can trust that it’s done correctly. You’ll also get the most benefits out of your surge protection over the years.

As much as 80 percent of power surges start inside your home or business, according to NEMA. Since they’re inside, that means that lightning and natural occurrences don’t make up a majority. Small surges can come from bad wiring, malfunctions, or uneven electricity flow. It could even be something as random as static electricity.

Whatever the cause, the outcome is the same: A small surge of electricity that could damage your electronics. While one may not do anything, these surges can add up and render your appliances useless. Keep in mind that lightning strikes also happen, so that’s a lot to worry about. Those massive power surges can wreak havoc on your home’s electronics. 

An overloaded circuit or arc flash through wiring from a power surge could cause an electrical fire, too. What many people don’t know is that a power strip surge protector isn’t designed for major fluctuations. They can handle the smaller problems, but large power shifts can overwhelm a power strip. However, whole home surge protectors are built for everything. 

If you get a lot of storms in your area or want the best protection, call our electrician today! Turner On Services has a team of professionals that can recommend the best products to keep you and your electronics safe!

Let an Electrician Take Care of You

It’s important to feel secure when you’re at home, whether it’s been a long day at work or there’s a bad storm. 

If you hear lightning, the last thing you want to worry about is how much damage it might do to your appliances.

While there are actions you can take to help, like unplugging things or having a whole home generator installed, you still want to feel safe.

We care about our customers and want the best for them. That’s why you should let us give you surge protection service in Batavia, OH. 

Since you can plug in a power strip, you might end up spending anywhere from $15 to $40 for a good one. However, that’s for each one.

Photo of Expert Surge Protection in Batavia, OH

Considering all the appliances and devices you have, and to avoid overloading a circuit, you could need multiple power strips. Now you’re looking at a couple hundred dollars. That’s before you get to damages from any big surge that comes through.

On average, a whole home surge protector can cost around $500 with $200 being the low end. That may sound like a big difference, but you’re protecting everything from any type of power surge. Power strips can’t be used for major appliances that rely on your electric panel, like the HVAC unit, stove, washer and dryer, or the oven. Those are some heavy hitters in the financial department to replace.

With our expertise, we’ll also make sure that your surge protection service in Batavia, OH is installed correctly. If you want the cost-effective option to keep your home safe, give us a call today!

Get Surge Protection Service in Batavia, OH and Surrounding Areas

We understand that it costs more to get a whole house surge protector. As opposed to the power strip variety, it might look like a lot more, but it’s much more cost-efficient. You’d have to have a power strip for each major appliance to make it remotely effective.

Even then, the power strip can’t handle major surges so you could end up having to replace a refrigerator, washer, dryer, and TV at once. While a power strip is good to protect one or two things, you’re better off letting our electrician install a whole home surge protector.

Technology advances every day. We live in homes with smart devices now, which work great. Unfortunately, they’re also more expensive. If you rely on power strip surge protectors, a single lightning strike could mean thousands in repairs or replacements.

Compared to the protection that a $200 or $700 box could cost, a whole home surge protector is worth every penny. Not to mention the added security you’ll feel with one in your home. You can also trust our experience and expertise on the matter.

Call Turner On Services today and let our electrician get started! We’ll make sure that everything is installed safely and correctly. We’ll also recommend the top products to make sure all of your appliances and electronics are as safe as possible!

Don’t forget to ask about our lighting servicesgenerator installation services, and smart home technology!


Emergency Electrician in Amelia OH

Avoiding Hazards in Clermont County, OH

There are a lot of things that can happen to your home’s electricity. While wiring and electrical panel replacement can be a major issue, sometimes it’s more natural. Bad storms bring lightning and power surges that can wreak havoc on your electrical systems.

  1. When you have a lightning storm, there are several things that you can do to minimize your risk of an electrical shock. Here are a few steps to take or things to avoid: Don’t take a bath or shower.
  2. Stay away from plumbing.
  3. Avoid using the sink.

You might have noticed that they all have water in common. Since it’s a conductor of electricity, anything to do with water should be avoided around lightning. Pipes and plumbing can become especially conductive because of the addition of metal.

While the toilet is usually made of porcelain, it’s still best to wait until a thunderstorm is over to use the bathroom. Electric shock can be dangerous, or even fatal. The longer you’re connected to an electrical surge, the more damage it can do to your body.

If you want to know more ideas to stay safe in a storm, feel free to contact an electrician near me. Turner On Services has a team of experts ready to help with any electrical question or issue, so give us a call today!

Be Prepared for Lightning!

Lightning strikes aren’t just dangerous for a shock or power outage. The electrical surge they can cause could damage appliances. This can get expensive, between repairs and replacements. 

To keep that from happening, you can unplug your devices and use surge protectors in your home. If the storm’s bad enough that it knocks out your power, you might need to turn off the circuits and your main breaker. 

There’s also the danger of an electrical fire, so caution is the best option. Treat your electronics the same way you will water during a storm. Otherwise, you could get zapped or worse. Anything connected to the landline could connect you to a surge if lightning strikes. 

If you have any questions or want more information, call us today!

Protecting Yourself During a Flood

Of course, when it comes to natural events, lightning storms aren’t the only thing to worry about. While you can avoid water during that scenario, flooding puts water into your home. Since you have electricity and wiring, flooding can be extremely dangerous. 

The best choice is to avoid a building that’s flooded. If you know the power’s off, that’s different, but it’s still best to steer clear. That’s not always an option, though, if you live there. Still, there are steps you can take to prevent flooding or an electrical hazard. 

If you know bad weather’s imminent, turn off the power to your electrical panel. Remember to start with the individual circuits before shutting off the breaker switch. It’s also recommended to unplug your appliances and set anything higher that you can lift. 

Thunderstorm in Clermont County

After the flooding has receded, don’t use any electronics that were water-logged. Let one of our electricians in Clermont County, OH give them a professional inspection first. This goes for devices, lighting, outlets, and many others. Our main goal is your safety and security. 

With our experience, Turner On Services will give you a thorough inspection anytime you need it. We also provide routine maintenance and replacements, so call us today if you need electrical services of any kind!

Don’t hesitate to ask about our lighting servicesgenerator installation services, and smart home technology!


Woman in Winter

We’ll Be Your Electrician in Clermont County, OH

You never know when something can happen to your electricity. While it might not be an issue during the summer, you’ll need your heater during the winter. That’s not the only way that electrical failures can affect you during the cold season, which can be dangerous.

Power outages are commonly associated with bad storms and lightning, but they can happen from freezing. If the power goes out, even a pristine heater will be useless. An electrician near me can keep things working, but there are things you can do to prepare.

Our team at Turner On Services can install a backup generator, for example. A portable generator is limited to what it can power and needs refueled every few hours. Standby generators are quieter and start working automatically once your power goes out.

A whole-house generator does what its name suggests. We’ll connect it directly to your gas line and it can power the major appliances in your home. If you want to be ready for Winter, call us today and let our electrician make your home secure

Use a Professional Electrician to Inspect Your Home

One of the best things you can do for your house is schedule a routine inspection. You should always work with a professional to get the best results. We know what to look for, such as old or damaged wiring and broken appliances.

In many cases, we can repair the issues and keep you safe. Wiring that’s damaged can lead to damaged devices, electric shock, or an electrical fire. The damages caused by bad wiring can be very expensive or even fatal, so it’s best to let us take care of maintenance.

We’ll also check to make sure you’ve got an updated electrical panel. If you have an older home, you might still use a fuse box. Those weren’t designed for the needs of modern homes, with only half the amps that panels are built for, so they can overload easier.

Of course, your panel won’t last forever. Electrical panels can last around 25 years with maintenance, but they can lose efficiency earlier. After 10 years, you might consider an electrical panel replacement to get the upgraded benefits of technology.

During the winter, you might also rely on a space heater. If you do, there are a few safety measures to keep in mind:

  1. Don’t plug it into a power strip. Not only can power strips not handle the output, but they can melt or ignite.
  2. Use an outlet with nothing else plugged in for the best, and safest, results.
  3. Leave 3 feet clear around your space heater. Never put anything flammable, like wood or paper, within that space. The best flooring option is tile, or hardwood.

If you need us to take a look at your electrical panel or make sure that your space heater is safe to use, don’t hesitate to give us a call today!

The Best Electrician in Clermont County, OH

Power strips, fuse boxes, panels, and their circuits can all be overloaded. Plugging too many devices, especially ones with large power demands, can cause a short circuit. Overloading a circuit can cause an electrical fire in your home.

It can also cause appliances to strain, which can damage them and need expensive repairs or replacements. Limit how much you plug into each outlet and avoid using power strips. An electrician near me can install more outlets if necessary.

Winter House in Clermont County

We can also recommend the best surge protectors for your home. One reason for a professional electrician is that we know where to space out your outlets. Sockets should never be too close to water. We suggest waterproof appliances in the bathroom, for the same reason.

You should also cover any outlets if you have children, until you can explain electrical safety to them. There are several steps you can take to ensure your home’s safety. If you want electrical security, call Turner On Services today!

If you are interested in other services like generator installationlighting services, or smart home technology, don’t hesitate to ask us!


Back up Generator Installation in Milford OH

Professional Generator Installation in Milford, OH

Most homes run on electricity these days, so a power outage can be devastating. Appliances can be damaged and food can go bad. That all gets expensive, not to mention the chance that you might have medical equipment that needs powered.

Turner On Services is here for your electrical needs! You want a professional electrician to keep you safe, and we’ll give you a backup generator installation in Clermont County, OH. This is almost necessary if the power goes out during the winter.

The heat going out in your home when it’s freezing might not ruin your food, but it can be just as dangerous.

Our generators can start once your home loses power. That way, you don’t have to worry about you or your family staying warm.

We know what wattage your generator will need to be to power your major appliances. We’ve got a team of electrical experts that can help, so call us today to get started with an inspection and estimate!

Keep the Lights On with Generator Installation in Milford, OH

While a portable generator might be enough, we recommend one for your whole house. Portable ones are useful, but limited in what they can handle. They also need to be refueled every few hours, so they can take a lot of resources.

Whole house generator installation in Clermont County, OH will keep your major appliances running as long as you need them. They’re connected directly to your gas line, so the power supply doesn’t rely on electricity.

Our electrician at Turner On Services will know the right size generator you need. If you work from home, you won’t have to worry about missing a deadline during a power outage. You’ll also stay connected to the Internet, so you won’t drain your phone.

That way, you’ll have means of communication if there’s an emergency. Backup generators also run quieter than portable ones, so you won’t be disturbed by noise. Call us today to get started with your generator needs!

Furthermore, don’t hesitate to ask us about smart home technology, or our lighting services!

Secure Backup Generator Installation in Clermont County, OH

One reason that a power outage can be scary is that you never know how long it might last. While you can call your provider and find out, a bad storm could knock things down for hours. With the lights out, you could run into things and get injured.

Medical equipment shutting off is never a good thing, but it could be seriously dangerous. You might be able to contact your provider and get emergency power, but you deserve peace of mind with a generator installation in Milford, OH.

Family enjoying generator installation in Milford, OH

We’ll keep things running so that you don’t have to worry. Even if it’s not life-threatening, a power outage can hit your wallet. The U.S. Department of Agriculture found that, in just 20 minutes, some bacteria can double if the temperature goes past 40 degrees.

Once your refrigerator goes out, it’s only a matter of time before the food spoils. Even if it doesn’t, food could be covered in bacteria by the time the power comes back on. A generator can prevent these issues from happening and save you money.

Speaking of costs, frozen pipes can crack or burst and cause hundreds or thousands in damages. With an electrician from Turner On Services, you can count on our experience to keep things running. Call us today to get started!


Electrician in Amelia OH

Do You Have an Electrical Emergency?

There are many types of emergency situations that could arise from electricity. There could be faulty wiring or overloaded circuits. Electricity can be dangerous or fatal, so it’s always recommended to let a professional electrician in Clermont County take a look.

Still, bad things can happen at any time. If you have an electrical fire, get shocked, or experience a power outage, we want you to be prepared. You can also take steps to prevent these problems.

If you need help, feel free to call our electrician at Turner On Services!

How to React to an Electrical Fire

One of the scariest things about an electrical fire is that it can happen at any time. Because it involves an arc flash between wiring, it could be caused by bad wiring or improper installation. Unfortunately, that arc could occur at the time of installation or years later. Whatever the cause of your electrical fire, they’re more common than you might think. It’s important to know how to react if you’ve got a fire in your house. An electrician near me is your best option to deal with one, but here are some ways to stop an electrical fire:

  1. The first thing you should do is turn off the power. Without a source of electricity, the fire might not spread. In some cases, it could stop the fire completely. If you’re not sure how to cut off the power, go to your electrical panel or fuse box and shut off the switch.
  2. By turning off the power, you can prevent electrical shock to anyone trying to put out the fire. You also open up your options to putting out the electrical fire.
  3. Stay calm in an emergency. If you’re unable to shut off the power or put out the fire, you need to leave quickly. Stay under the smoke and find an exit while covering your mouth. Once outside, call 9-1-1.
  4. With the power off, you can try to use a blanket, carpet, or something similar to smother the fire. Water can also be used to remove the oxygen from the fire, putting it out. If the power’s still on, though, don’t go near the fire or use water.
  5. Everyone should have a fire extinguisher, but you should also know how to use it. If the power’s still on, you have to use a Class-C extinguisher. Class-A types are good if the power’s off, because they’re water-based. To make it work, pull the pin and point the nozzle at the fire. Squeeze the handle and make sure the fire is gone completely.
  6. Whether you put the fire out or not, call 9-1-1. Anything burned could reignite, so you want an electrician in Batavia, OH or fireman to check your property either way. You’ll also need to replace any used fire extinguisher, even if it’s not empty.
How to Prevent Electrical Fire

Steps to Prevent an Electrical Fire

There are things that you can do to minimize the risk of an electrical fire in your home. The best method is to have an annual inspection by a trained electrician. However, that’s not the only thing you can do. You might be surprised how many electrical panels are labeled wrong, but it happens. Making sure that your panel has the right labels is important. You should also make sure that your panel’s emergency shut-off works, too. Here are some other steps you can take:

  1. Don’t put anything flammable near outlets, especially one that you’re using.
  2. Power strips can be helpful, but they can also cause an outlet to be overloaded. With too many devices plugged into a single source, you can quickly overwhelm that circuit and cause an electrical fire.
  3. It’s also good to use surge protectors to keep your devices safe in the event of a power surge.

How to Handle Electrical Shock

While most people do their best to avoid being shocked, it can happen to anyone. There are things you can do to prevent an electrical shock, of course. There are also levels to the danger, like wires near water. Here’s a good start to your electrical shock emergency plan:

  1. It may seem like common sense, but staying back from a high-voltage wire can save your life. In fact, the safest distance is 20 or more feet back. If you notice the wire moving, it’s recommended to increase that distance.
  2. No matter what, don’t touch someone that’s being shocked. Electricity can jump to you if that happens and then you’re just as likely to be electrocuted. Call 9-1-1 and try to shut off the source of electricity, if possible.
  3. If someone is being shocked, you can’t touch them. However, you can try to separate them from the source. If you can’t shut off the power, you can use something insulated to disconnect them. PVC pipe, rubber, and wood can be effective. Don’t use anything wet, though.
  4. Time is of the essence when someone is being shocked. The longer they’re electrocuted, the worse the damage can be. If it takes too long to remove them from the connection, electrical shock can be fatal.
  5. You should always try to shut off the power. Whether it’s the fuse to that circuit or the emergency shut-off to your whole home, an open electrical wire can be dangerous or even fatal.
  6. Act quickly to shut the power off or disconnect the shocked person, but make sure you call 9-1-1 as soon as possible. The operator can walk you through medical assistance until professionals get there to help. Since electricity can have major short- or long-term effects, you should do as instructed regardless of what the victim says. If you need an electrical panel replacement in Batavia, OH give us a call today!

Ways to Prevent Electrical Shock

The first step to stopping a problem is making sure there isn’t one in the first place. That’s why our team of electricians want to give you ways to keep an electrical shock from happening. The good news is that there are many things you can do.

Keep outlets covered around children. Once they’re old enough, explain electrical safety to them. While we recommend hiring an electrician near me for your needs, we also know that some homeowners like to do things themselves.

If you decide to do small repairs yourself, you should call us about anything you’re not sure of. Improper wiring is a big cause of shocks and electrical fires. You should also have a safety shift-off switch in your home.

These control the amount of electricity going through a circuit and turn it off if there’s an issue. Since electrical problems can happen at any time, this is always recommended. If you need help, contact us today for any electrical needs!

Preventing Electrical Emergencies

What to Do if There’s a Power Outage

Out of everything, a power outage is the emergency you’ll most likely deal with. It could be from bad weather, a blown transformer, or an electrical service issue. Blackouts are often out of your control, so it’s good to be prepared. Here are some things to consider:

If you know a storm is coming or you want to be ready, have an emergency kit set up. Flashlights, candles, batteries, matches, water, food, and a handheld radio are all good ideas. You’ll also want to make sure your kit’s easy to get to.

Don’t panic. While it could be something mentioned earlier, it could also be a blown fuse or breaker. Try to reset your electrical panel, just in case.

Have a mobile phone that’s charged for communication. In the case of an emergency, you’ll need a way to call 9-1-1.

Get more information by calling your service provider. They’ll be able to tell you how long you’ll be without power and what they’re doing to fix it.

Make sure that your appliances are turned off. Start with the circuits first, then your electrical panel. When the power comes back on, you don’t want them to be damaged.

Surge protectors can keep your appliances safe when the power comes back on, too.

Protect the food in your freezer by keeping the door closed. This will keep things cold longer.

You might also want a portable generator for a back-up power source.

Don’t turn things on right when the power returns. Electricity can be fickle, and it could damage or ruin your electronic devices. When it comes back on, turn on your panel or main breaker, then the individual circuits.

If you want to know more information on a power outage, feel free to call our electrician at Turner On Services today!

Emergency Electrician in Amelia OH

How to Avoid a Power Outage

There are things you can do to lower the chances of a blackout in your home. If you use solar panels, you can store energy in a battery bank. We already mentioned it, but a whole-home or portable generator is a great option to have.

This is especially important if you need medical equipment to stay on. In that situation, a power outage could be fatal. Let your distributor know, and you might be able to get a special supply of power during an outage.

If you need an electrician in Clermont County, you can trust Turner on Services with all of your electrical needs. We’ll check your hookups and wiring to make sure that you’re in the best position to be safe during a power outage!

Don’t hesitate to ask about lighting services in Batavia, OH!


outdoor lighting 2 1

Get Your Electrician Near Me

Modern homes have a lot of technology, which means that much more than can go wrong. From lighting and electrical panel replacement to repairs and maintenance, we always recommend a professional. Turner On Services has a team of experts that offer a number of services.

If you’re used to doing things yourself, you might want to fix the wiring on your own. This could lead to an electrical fire or electrocution. It can also cause your electric bill to go up, so there are several reasons to hire an electrician near me.

When you work with us, you’re getting the satisfaction of expertise. We’ve got a lot of experience with all kinds of electrical situations. You can trust us to give you the best results, so call us about your free inspection today!

What to Look for in an Electrician Near Me

Choosing the right electrician can be overwhelming if it’s been a while or this is your first time. While we know we’re the best, we also know that there are a lot of other companies out there. However, Turner On Services believes in transparency and wants to help.

When it comes to your decision for an electrician, you obviously want a licensed professional. There are other factors to consider, though, so our team has come up with some of the most important things to keep in mind when doing your research.

Always pay attention to the price. While it’s a general rule of thumb not to be ripped off, you also don’t want to hire someone because they’re drastically less expensive. Someone who charges that much less might not be trustworthy with your wiring.

Since an electrician near me can impact your home’s safety, it’s not something you want to sacrifice. On that note, you should always check credentials. Some electricians are masters while others are journeymen in the craft. The latter has a license without passing the standardized test. That means they can do repairs and installations, but their other services and knowledge are limited. Master electricians are licensed and passed the test, so we can design, install, and repair all of your electrical needs.

Getting the right electrician near me can be crucial to your security. It can also affect the efficiency of your indoor and outdoor lighting, which can increase your electric bill. When you’re ready to get the best, give Turner On Services a call today!

One More Place to Check

To cover all your bases for research of an electrician near me, you can always look online. It’s the modern word of mouth, because customers will leave reviews of their results. When you’re reading the reviews, there are some things to think about:

Skilled Electrician in Anderson OH
  • How many reviews are there? There should be at least 50 positive reviews, because it means the electrician is active and experienced.
  • Do the reviews mention the specific service you’re looking for? If not, the company might not do the service or it might not have satisfied the customers.
  • How long have they been in the community? Knowing that the electrician has worked on similar housing or with someone you know can give them credibility.

Above all, you deserve the best electrical work for you and your home. Having a professional electrician can keep your property safe and save you money as the years go by. To get started with a free inspection, give us a call today!